Tag: MAC

Change the default passwords as most network devices have a pre-configured default password and these are easily found online.

2. Install a firewall directly onto your wireless devices (a host-based firewall). Attackers who directly intercept your wireless network may be able to by-pass your network firewall and so this does not offer sufficient protection.

3. Restrict access – only allow authorised users to access your network. Each piece of hardware connected to a network has a MAC (media access control) address. Restrict or allow access to your network by filtering MAC addresses. The MAC address is a unique identifier for networking hardware such as wireless network adapters. A hacker can capture details about a MAC address from your network and pretend to be that device to connect to your network. MAC filtering will still protect you from majority of the hackers. Find the MAC address for your network adapters on your devices by following these steps:

1. Go to Start > Run

2. Type command and press [Enter]

3. Type ipconfig /all in the command prompt window and press [Enter]

4. You can view the physical access address in the information displayed.

4. Check the user documentation to get specific information about the MAC Filtering process if you have any more queries.

5. Encrypt the data on your network. Encrypting the data would prevent anyone who might somehow be able to access your network from viewing your data.

6. Protect your SSID (Service Set Identifier – An SSID is the name of a WLAN). The SSID on wireless clients can be set either manually, by entering the SSID into the client network settings, or automatically, by leaving the SSID unspecified or blank. A network administrator often uses a public SSID that is set on the access point and broadcast to all wireless devices in range. You can disable the automatic SSID broadcast feature to improve network security.

For more detail on Motherboards log on to

John Wells provides you the best and latest information on spice CDMA Phone and Intel P35 Motherboards . he suggest you log on to

This article will show you how to setup Wireless MAC Filter feature in order to enable wireless access for authorized computers located on your home/office network. This article is designed for CCNA students, network engineers, and anyone looking to block wireless access for unwanted wireless devices using the Linksys wireless router.

The Linksys router offers a couple of security tools in order to secure your wireless network. One of these tools is the Wireless MAC Filter feature. This feature allows you to block unwanted computers by adding their MAC addresses to the router’s filter MAC Address list. In addition, you can block unwanted computers by adding the MAC addresses of your network wireless devices to the router’s permit MAC Address list. .

Follow these instructions in order to restrict access to your wireless network:

Step 1: Open your favorite web browser application, and enter the IP address 192.168.1.1 in the address field. Then press Enter.

Step 2: In the authentication dialog box, enter the administrator’s username and password. The default values are admin/admin for the username/password. However, on some Linksys router platforms, the default value for the username is the blank and for the password is admin.

Step 3: Open the Wireless tab.

Step 4: Click Wireless Access.

Step 5: Click Restrict Access in order to restrict access to your wireless network. Otherwise, click. Allow All.

Step 6: Click Prevent in order to block access for computers listed in MAC Address Filter list. Otherwise, click Permit only.

Step 7: Click Edit MAC Address Access List.

Step 8: Enter the MAC address of the concerned computers in the format of xxxxxxxxxxxx or xx:xx:xx:xx:xx:xx, where X is in the range of 0-9 or A-F.

Step 9: Click Save Settings and close the window.

Visit this website to learn more about CCNA syllabus, prepare for the CCNA Certification exam, and learn more about Linksys router setup.