Tag: IEEE

Electronic dog fences today are getting better and better. Developing more useful features and creating patented new technology, dog containment systems have become more advanced and reliable. One of the hottest pet fencing today is the Petsafe Wireless Dog Fence . Wireless? Yes, you’ve read that right.

Just when we thought that personal computers, video game consoles, printers, smart phones, and laptops are the only stuffs working on Wi-Fi technology, IEEE 802.11 has found its way to improve dog containment fences.

The development of electronic dog fences has already made containment easier and better for our favourite pets. The Wireless Dog Fence is considered to be a major development on electronic pet products. Designed for small to medium dogs, this easy-to-install dog fence is the new convenient way to safeguard and train pets. It is not just a dog containment but also an effective training tool teaching pets to stay away from restricted areas determined by owners. Composed of a signal transmitter, a waterproof collar, and boundary flags, having no wires to bury will help owners avoid any hassles that buried wires may bring.

So how does it work? The transmitter sends a signal to the collar worn by the pet. The wi-fi collar transceiver offers more customized options than any other collar. The wireless dog fence from Petsafe covers a wider range than any other similar containment. Pet owners are given the freedom to choose among the 4 static settings or go for setting 5 which offers Progressive Correction. As the pet comes near the preset boundary, the collar emits a warning tone. If the dog insists to continue, a pre set correction will be given.

Thanks to new technology, pet owners can have the peace of mind that their pets are safely contained. These pet dog fences are tested and proven safe and effective for dogs. Pet manufactures will continue to innovate high-tech pet supplies. New technology will make pet ownership easier and convenient. It also helps us become more responsible pet owners looking after the safety of our pets.

WET610N is a dual-band wireless Ethernet bridge based on IEEE 802.11n draft 2.0 and optimized for video transmission. WET610N can operate in either 2.4GHz or 5.0GHz radio bands (selectable dual-band), and it is fully backward compatible with widely deployed 802.11a/b/g infrastructure, 1-Port 10/100 Mbps half or full-duplex modes, auto-sensing, integrated QoS features.
The IP Address is set to DHCP, if you have a router or DHCP server check the DHCP Clients table for address. If there is no DHCP Server detected the Bridge will default to the IP address 169.254.1.250.
WET610N does not have default IP address. It will pick up one from the router or DHCP server.
You should know the wireless settings of your network.
If your wireless network is secured then make sure that you have the correct wireless network key/password.
How to setup WET610N:
Connect WET610n to the router with the Ethernet cable.
Open the setup page of your wireless router and go to the DHCP client table list. In this list you will find the devices connected to your network. You will find the IP address of the bridge. Note down that number.
Open the Internet browser and in the address bar type the IP address of the bridge. It will open the setup page of the bridge.
Click on Wireless tab and go to Wireless Network site survey. Select your wireless network from the list and try to connect. If it is a secured wireless network then enter the password of your wireless network. It will connect to the network.
Now disconnect the Ethernet cable from the bridge and power cycle it. Now try to ping the IP address of the WET610N.
If you are not able to find IP address of your bridge in the DHCP client table of your router then you can try another way to access the setup page.
Connect WET610N to the Ethernet port on your computer. Press and hold the reset button for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle it.
Now open the Internet browser on your computer and in the address bat type 169.254.1.250. Log on to the setup page and try to connect to the wireless network.
Once the wireless bridge is configured successfully, you can connect it to the device that you want to use in the network. You can use it with special devices like Play station, BluRay player or Xbox also. If you have more that one devices that you want to use it wirelessly then you can connect the bridge to a switch and connect all the devices to the switch. In this way you can connect multiple devices to the wireless network using only one wireless bridge.